You are here: Home > Equipment > Weaver's Shed > Floor Looms > Louet
We found 19 results matching your criteria.
Sort By:
Page of 1
Louet Octado 110-43" 8 shaft Louet Octado 90-35" 8 shaft Louet Octado 70-27.5" 8 shaft
Louet Octado 110-43" 8 shaft
Our Price: $7,395.00
Louet Octado 90-35" 8 shaft
Our Price: $6,985.00
Louet Octado 70-27.5" 8 shaft
Our Price: $6,400.00
Another great dobby weaving loom from Lout: 8 Shafts, 70 cm, 90 cm and 110 cm weaving width (28", 36 and 44).

A dobby mechanism (programmable shaft selector) is an alternative for the tie-ups to the treadles on a standard hand weaving loom.
Looms with 16 or more shafts need a dobby mechanism, because it becomes unmanageable to operate such a loom with treadles.


The successful introduction of the Megado dobby loom in 1998, and the reaction of weavers showed us that a dobby is not only necessary for a loom with many shafts, but it makes weaving so much more comfortable. Of course this also goes for looms with less than 16 shafts.

An 8-shafts jack loom requires an average of 40 tie-ups on the treadles. A counter marche requires 80 tie-ups. This needs to be done in a very uncomfortable position. With a dobby loom, you can say good-bye to the tie-ups!

An investment in a Lout dobby loom will allow you many years of comfortable weaving.

The new Octado has a similar operating method as the familiar Megado. This means a big counter marche shed and a very light treadling action. Again, easy on the weaver.

The Octado can be operated with a mechanical dobby, or with an electronic interface. The electronic interface works with most popular computer weaving software, includeing Fiberworks PCW, Patternland, PixieLoom, Weavemaker, Proweave and Weave It. The Octado interface has a 2 year warranty against manufacturer's defects.

A full list of optional equipment is available: Bench, second warp beam, sectional warp beam and flying shuttle.

The middle section of the Octado (where all the shafts are) comes completely assembled. A detailed instruction manual will help you to complete the assembly without any problems.

IT IS STRONGLY RECOMMENDED THAT YOU CONTACT US BEFORE PURCHASING SO WE CAN HELP YOU GET ALL THE PARTS YOU NEED.
Another great dobby weaving loom from Lout: 8 Shafts, 70 cm, 90 cm and 110 cm weaving width (28", 36 and 44).

A dobby mechanism (programmable shaft selector) is an alternative for the tie-ups to the treadles on a standard hand weaving loom.
Looms with 16 or more shafts need a dobby mechanism, because it becomes unmanageable to operate such a loom with treadles.


The successful introduction of the Megado dobby loom in 1998, and the reaction of weavers showed us that a dobby is not only necessary for a loom with many shafts, but it makes weaving so much more comfortable. Of course this also goes for looms with less than 16 shafts.

An 8-shafts jack loom requires an average of 40 tie-ups on the treadles. A counter marche requires 80 tie-ups. This needs to be done in a very uncomfortable position. With a dobby loom, you can say good-bye to the tie-ups!

An investment in a Lout dobby loom will allow you many years of comfortable weaving.

The new Octado has a similar operating method as the familiar Megado. This means a big counter marche shed and a very light treadling action. Again, easy on the weaver.

The Octado can be operated with a mechanical dobby, or with an electronic interface. The electronic interface works with most popular computer weaving software, includeing Fiberworks PCW, Patternland, PixieLoom, Weavemaker, Proweave and Weave It. The Octado interface has a 2 year warranty against manufacturer's defects.

A full list of optional equipment is available: Bench, second warp beam, sectional warp beam and flying shuttle.

The middle section of the Octado (where all the shafts are) comes completely assembled. A detailed instruction manual will help you to complete the assembly without any problems.

IT IS STRONGLY RECOMMENDED THAT YOU CONTACT US BEFORE PURCHASING SO WE CAN HELP YOU GET ALL THE PARTS YOU NEED.
Louet Octado 110-44" 2nd warp beam Louet Octado 90-36" 2nd warp beam Louet Octado 70-28" 2nd warp beam
Louet Octado 110-44" sectional warp kit Louet Octado 90-36" sectional warp kit Louet Octado 70-28" sectional warp kit
Louet Loom Bench (22.5" non-adjustable) (Jane/Kombo/David/Spring/Magic) Louet Magic 70 sectional warp kit Louet David 70 sectional warp kit
Bench for the Klik, Kombo, David, Spring and Magic Looms. The height of the bench is 22.5". It is not adjustable. This bench is made of beech and is finished with a clear lacquer.
Louet David 70 2nd warp beam Louet David 90 tension brake system Louet David 70 tension brake system
Louet Texsolv 330mm (13") --Delta/Octado Louet Texsolv 390mm (15.5") --Spring Louet Texsolv 280mm (11") --David
Louet Texsolv 205mm(8")Jane/Kombo/Magic