You are here: Home > Fiber & Yarn > Fiber Prep Equipment > Strauch
We found 30 results matching your criteria.
Sort By:
Page of 1
Strauch Petite Carder drive band Valkyrie Comb Pad Strauch Doffer/Cleaner Brush
Valkyrie Comb Pad
Our Price: $20.00
Strauch's Petite carder comes with a well made and perfectly sized drive band. If you've worn out your drive band this is the replacement you need.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.
When this pad is clamped or screwed to a table or bench it allows the comber to keep one comb secure and stationary in the upright position. Works with all Valkyrie combs.  Clamps are not included. The Doffer/Cleaner brush is used to clean the large drum after you have removed the batt. It looks similar to a "Flicker" but with different points. Our Doffers are 2" wide and 4 ½" long. The pads have ½" long points spaced 72 per square inch. Use the center portion of the Doffer brush to contact the curve of the large drum. Starting at the seam, swipe the Doffer brush down the drum in the same direction as the teeth on the drum. Continue across the width of the drum. Slowly rotate the drum backwards as you use the brush to clean the entire drum.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.
Valkyrie Comb Pad - Cherry or Walnut Strauch Knuckle Saving Batt Pick Louet Mini Cotton Cards
Louet Mini Cotton Cards
Our Price: $59.95
When this pad is clamped or screwed to a table or bench it allows the comber to keep one comb secure and stationary in the upright position. Works with all Valkyrie combs. Clamps are not included.

You can choose Cherry or walnut. We also carry maple comb pads and those can be found HERE

Please note that the pegs on these pads are all maple.

This tool saves your knuckles from painful contact with the teeth of your drum carder while you are removing the batt from the large drum. It will not bend as does a knitting needle. Used correctly, the batt picker also saves the drum and card cloth from becoming damaged.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.
Louet Mini Cotton Cards
Louet Regular Hand Cards Strauch Hand Cards - Cotton/Fur (half/Child size) Strauch Hand Cards - Wool (half/Child size)
Louet Regular Hand Cards
Our Price: $75.00
Louet Regular Hand Cards (5-1/4" x 4", 255 teeth/sq. inch)

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 3-10 business days.
(5-3/4" x 4-1/2", 112 teeth/sq. inch)

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 3-10 business days.
Louet Cotton Hand Cards Valkyrie 12 inch Hackle Clemes & Clemes Curved Back Hand Cards -
Louet Cotton Hand Cards
Our Price: $85.00
Valkyrie 12 inch Hackle
Our Price: $85.00
Louet Cotton Hand Cards Valkyrie 12 inch Hackle

A very sturdy hackle with two rows of straight 4.5 inch long hardened and polished steel tines set in a straight hard-maple base. These hackles easily mount to your work table with clamps (not included) because they have 1 1/2 inch of free space on each end for clamping.

The photo shows both the 12 inch and 18 inch sizes.

Choose your style of fineness from the drop down menu
Clemes hand carders are designed to combine comfort and function in a most necessary tool for the hand spinner. They use a maple turned handle that provides a comfortable grip for both small and large hands. The handle is tenoned into an alder wood back, either curved or flat, to ensure long life. The teeth are set in a strong yet flexible backing to provide many years of use. They regularly hear from customers who purchased their carders in the 1970's and are still using them on a regular basis.

Wool Carders

The wool carders have 72 points per square inch and are an excellent all purpose carder for carding any type of wool. The wooden backs measure 8" x 4 5/8". They are available curved or flat with most spinners preferring the curved back carders. They are

If it shows in stock it will ship from Maine. If it is a backorder(out of stock) it will be ordered from the factory and then shipped.
Strauch Hand Cards - Wool (full size) Valkyrie 2 Row Fine Mini Combs Strauch Hand Cards - Cotton/Fur (full size)
(wood base: 8" x 4-1/2", 112 teeth/sq. inch)

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 3-10 business days.
Valkyrie 2 row Mini Combs (pair)

Smaller and lighter than our Viking combs. Great for any fiber. Perfect for fine to medium fibers, such as Merino wool and Angora Rabbit. Same sturdy construction as the Viking Combs on a smaller scale. All Maple construction. Handle is a comfortable one inch diameter, tine head is 4" wide. Each comb weighs a little under 7 ounces. Each comb has 25, 4 1/4" long, polished, hardened steel tines with a long taper to a sharp point. These tines never need straightening. They are flexible enough to take abuse, and still bounce back to their intended alignment.

(10-1/2" x 4", 255 teeth/sq. inch)

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 3-10 business days.
The Photo shows the curved carders Valkyrie 18 inch Hackle - choose your tines Valkyrie Extra Fine Combs- MINI
Schacht has built a lifetime of service into our hand carders. They have a small lip milled into the rear edge of the paddle to protect the card clothing from becoming worn and the handles have been precisely tenoned into the paddles for superior strength.

These wool carders are 72 points per square inch (an all-purpose carding cloth), All Schacht carders are available with curved or straight backs. Please choose the appropriate choice from the drop down menu.

If it shows in stock it will ship from Maine. If it is a backorder(out of stock) it will be drop shipped from the factory usually in 2-4 weeks
Valkyrie 18 inch Hackle

A very sturdy hackle with two rows of straight 4.5 inch long hardened and polished steel tines set in a straight hard-maple base. These hackles easily mount to your work table with clamps (not included) because they have 1 1/2 inch of free space on each end for clamping.

The photo shows both the 12 inch and 18 inch sizes.

Valkyrie Extra Fine Combs (pair)

Designed specifically for finer, shorter fibers. 34 closely spaced tines per comb. The comb head is 4 inches wide with a 3 inch working width. Tines are 3 3/4 inch long hardened polished steel.

Valkyrie 2 Row Fine Full Size Combs Louet Roving Carder (Extra Fine) SALE !!!! Louet Drum Carder Standard Classic - SALE
Louet Roving Carder (Extra Fine) SALE !!!!
Our Price: $435.00
Sale Price: $325.00
Save $110.00!
Louet Drum Carder Standard Classic - SALE
Our Price: $635.00
Sale Price: $500.00
Save $135.00!
Valkyrie 2 row Fine Combs (pair)

Smaller and lighter than our Viking combs. Great for any fiber. Perfect for fine to medium fibers, Romney, BFL, Corrie, Finn and Merino wool. Same sturdy construction as the Viking Combs on a smaller scale. All Maple construction. Handle is a comfortable one inch diameter, tine head is 5" wide. Each comb has 4 1/4" long, polished, hardened steel tines with a long taper to a sharp point. These tines never need straightening. They are flexible enough to take abuse, and still bounce back to their intended alignment.

Front row has 16 tines, back row has 17. Total amount of tines = 33

Roving Carder Junior Standard Drum Carder (extra fine)
Strauch "Petite" Drum Carder Strauch "Mad Batt'r"  Drum Carder Strauch Finest Standard Drum Carder
The Petite is a manual drum carder with a polyurethane drive belt. This carder is great for fiber artists with budget and/or space considerations who want a Strauch quality machine.

As with all Strauch drum carders, the Petite comes with our Brush Attachment.  The Petite is an excellent choice for a mid-sized carder with full sized features. The Petite is slightly smaller, with 6¾" wide drums instead of the 8¼" wide drums on the singlewide chain drives. The carder produces a batt approximately 6½" wide x 22" long. The Petite also has a 4:1 drum ratio.

The frame is made from high durability MDF material. The Petite frame is 16" long, 10" wide and 7" high.  An important feature: The tall frame allows the handle to swing freely of the table surface.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.
Strauch's customers requested a Strauch-quality carder that would produce those wonderful, outrageous "art batts" full of exciting fibers and textures.

Thick batts weighing more than 3 ounces can easily be made.  The Strauch Model 302 series "Mad Batt'r" art drum carder as part of the Strauch regular product line.
This carder has deeper pins (1/2" long) and coarser carding cloth (72 teeth per sq. in.) on the large drum to accommodate all the fun add-ins that make these art batts say "spin me"!
The machine is built on the standard 200 series 6" tall solid ash-wood frame and, like all my drum carders, uses the unique "Slicker-Licker" cloth on the small drum. As with all of our 200 series carders, the Mad Batt'r has a 4:1 turning ratio.  The brush attachment makes it easier to control the type of art batt you are making. The batts produced are 8" wide and 27" long

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.
Strauch flagship model is the "Finest" model. This top-of-the-line model is unique and comes complete with the Brush Attachment and all available accessories.

This is just an all around standard great carding machine.

If in stock it will ship from Maine, otherwise it will be drop shipped from the factory usually in 3-10 business days.
Strauch "Mad Batt'r"  Double-Wide Drum Carder Strauch Finest Double-Wide Drum Carder Strauch "Mad Batt'r"  Drum Carder - Motorized
Strauch's customers requested a Strauch-quality carder that would produce those wonderful, outrageous "art batts" full of exciting fibers and textures. For those who want to make really wide and thick "Art-batts", the "Mad Batt'r double wide" model is available. This model has drums twice as wide as the regular Mad Batt'r and also comes with the Brush Attachment.

Thick batts weighing more than 3 ounces can easily be made.  The Strauch Model 302 series "Mad Batt'r" art drum carder as part of the Strauch regular product line.
This carder has deeper pins (1/2" long) and coarser carding cloth (72 teeth per sq. in.) on the large drum to accommodate all the fun add-ins that make these art batts say "spin me"!
The machine is built on the standard 200 series 4" tall solid ash-wood frame and, like all my drum carders, uses the unique "Slicker-Licker" cloth on the small drum. As with all of our 200 series carders, the Mad Batt'r has a 4:1 turning ratio.  The brush attachment makes it easier to control the type of art batt you are making. The large drum is 7" in diameter x 15¼" wide. The carder produces a batt approximately 15" wide x 22" long. The frame is 24" long, 18½" wide, 6" high. The photo shows the single wide carder.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.
This machine is for those who need a larger production machine, a "Finest double wide" . Part of the flagship "Finest" model series, this top of the line model has drums twice as wide as the regular Finest and also comes complete with all available accessories including the Brush Attachment.

The wood frame is solid ash with a warm honey-oak/tung oil finish. The large drum is 7" in diameter x 15¼" wide. The small drum is 2" in diameter x 16" wide. The carder produces a batt approximately 15" wide x 22" long. The frame is 24" long, 18½" wide, 6" high.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.
Our customers requested a Strauch-quality motorized drum carder that would produce those wonderful, outrageous "art batts" full of exciting fibers and textures. The manual carder has become so popular that offering a motorized version was the next logical progression.

Having both hands free makes it easier to control the type of art batt you are making. Since you can set the drum rotation speed to a particular value, your batts are consistent. Thick batts weighing more than 3 ounces can easily be made.

It uses the same motor and electronics as the Finest series. Included are all accessories and the brush attachment

We do not stock these but they usually ship from the factory as fast as if we did. Shipping is free within the US. For international shipping, please message for a quote.
Strauch Finest Standard Drum Carder - Motorized Strauch "Mad Batt'r"  Drum Carder - Double Wide - Motorized The first photo shows the drum size - the second photo shows a standard from the profile. This is a listing for the double drum.
Strauch says "By popular demand, we have now developed a motorized series of Finest drum carders. This includes both the singlewide and doublewide machines. In addition, both existing Strauch hand crank chain drive Finest models can be upgraded to the motorized version.

Being an engineer, I designed these machines to be truly unique in the marketplace and built with the same high standards as the hand crank models. They are "high tech" drum carders having both infinitely variable speed AND reversibility features. The "infinitely variable speed" feature (not just two or three speed settings) is a God-send when working with fine fibers like alpaca, merino and cashmere.

Our carders use very high quality, durable, electronically controlled motors that are made in the USA! All these machines have been extensively beta tested by some "heavy duty" fiber artists and they all have raved about the design, workmanship and durability.

The dimensions of these carders are the same as their manual counterparts."


If in stock it will ship from Maine, otherwise it will be drop shipped from the factory usually in 3-10 business days.

For those who want to make really wide and thick "Art-batts", the "Mad Batt'r double wide" model 302x2-BA is available. This model has drums twice as wide as the regular Mad Batt'r motorized drum carder.

Other than size, the doublewide version of the Mad Batt’r motorized has the identical features and benefits as the singlewide version and comes complete with all available accessories including the brush attachment.

Having both hands free makes it easier to control the type of art batt you are making. Since you can set the drum rotation speed to a particular value, your batts are consistent. Thick batts weighing more than 3 ounces can easily be made.

It uses the same motor and electronics as the Finest series. Included are all accessories and the brush attachment

We do not stock these but they usually ship from the factory as fast as if we did. Shipping is free within the US. For international shipping, please message for a quote.
Strauch says "By popular demand, we have now developed a motorized series of Finest drum carders. This includes both the singlewide and doublewide machines. In addition, both existing Strauch hand crank chain drive Finest models can be upgraded to the motorized version.

Being an engineer, I designed these machines to be truly unique in the marketplace and built with the same high standards as the hand crank models. They are "high tech" drum carders having both infinitely variable speed AND reversibility features. The "infinitely variable speed" feature (not just two or three speed settings) is a God-send when working with fine fibers like alpaca, merino and cashmere.

Our carders use very high quality, durable, electronically controlled motors that are made in the USA! All these machines have been extensively beta tested by some "heavy duty" fiber artists and they all have raved about the design, workmanship and durability.

The dimensions of these carders are the same as their manual counterparts."


If in stock it will ship from Maine, otherwise it will be drop shipped from the factory usually in 3-10 business days.