The arms on this "EasyWind" skeiner adjust so that the circumference of the skeins can measure from as small as 30 inches to as large as 76 inches. The Pegs-Plus have a 2" flange with a 5/8" lip at the end of each peg. This allows for better retention of yarn to accommodate winding large skeins; can be removed. Skeins are easily removed by loosening and shortening one of the arms to release the tension. A mechanical counter is mounted on the skeiner. Total yardage will depend on the positions of the adjustable arms. Specs: overall length is 35", width 18", overall height 31", weighs approximately 21 pounds.

This "EasyWind" Skein Winder is available in the standard 2-yard (pictured). Since these arms are not adjustable, some caution is needed when removing a skein to prevent too much pressure on the pegs. Gradually loosen the skein from all 4 pegs before removing it. A MECHANICAL COUNTER is mounted on the skeiner. The total yardage of the skein on a 2-yd skeiner would be double the amount shown on the counter. Specs: overall length is 34", width 16", overall height 31", and weighs approximately 18 pounds. NO LONGER IN PRODUCTION.

Strauch's Jumbo Ball Winder. It's a class all in its own. If you need to wind yarn (small or super large skeins) then this is the ultimate ball winder have. If you've used the plastic winders, this one will be so much better. If you're winding yarn by hand, this is certainly going to be luxurious.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

This is a floor base for the Swifts and Skeinwinders. The actually Swift/Skeinwinder is sold separately.
Choose your wood type

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

This is a table base for the Swifts and Skeinwinders. The actually Swift/Skeinwinder is sold separately.
Choose your wood type

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

This is just the umbrella part  for the Swifts and Skeinwinders. If you want a complete unit we do have listings for those as well.
Choose your wood type

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

There are two styles of Swift/Skeinwinder available, a floor model and a table model. This listing is for the Table model. There is also a Combo model available.
These models are interchangeable, collapsible and easily portable.

Introduced in April 2007, this newest addition to the Strauch Fiber Equipment line,uses the same umbrella section as is used on the floor model. Simply screw it intothe table base, attach the table clamp and you're eady to work. Measures 27" tall from table surface to top of knob. A suggestion: to more easily use as a skeinwinder, mount it on a shorter table so the top crank is more accessible.

Choose your wood type

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

There are two styles of Swift/Skeinwinder available, a floor model and a table model. This listing is for the Floor model. There is also a Combo model available.
These models are interchangeable, collapsible and easily portable.

This beautiful and functional piece of furniture has been delighting fiber artists since 1990. Measures 42" tall from floor to top of knob. Floor Swift / skeinwinders built after March 2007 incorporate all the
new improvements. The floor model uses the same umbrella section as on the table model. Simply screw it into the floor base.

Choose your wood type

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

There are two styles of Swift/Skeinwinder available, a floor model and a table model. This listing is for Both.  With this you get one umbrella unit and one each of the bases in your choice of woods
These models are interchangeable, collapsible and easily portable.

This beautiful and functional piece of furniture has been delighting fiber artists since 1990. Measures 42" tall from floor to top of knob. Floor Swift / skeinwinders built after March 2007 incorporate all the
new improvements. The floor model uses the same umbrella section as on the table model. Simply screw it into the floor base.

Choose your wood type

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

Deeper clamp for Strauch's Jumbo Ball Winder. The photo shows the difference in the one that comes with the winder and the deeper one.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

Larger yarn guide for Strauch's Jumbo Ball Winder. The photo shows the difference in the one that comes with the winder and the deeper one.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

Strauch's Jumbo Ball Winder. It's a class all in its own. If you've worn out your drive band this is the replacement you need.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

Regular clamp for Strauch's Jumbo Ball Winder. The photo shows the difference in the one that comes with the winder and the deeper one - This listing is for the smaller clamp that comes stock with the winders..

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.