(5-3/4" x 4-1/2", 112 teeth/sq. inch)

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 3-10 business days.

(5-1/4" x 4", 255 teeth/sq. inch)

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 3-10 business days.

Deeper clamp for Strauch's Jumbo Ball Winder. The photo shows the difference in the one that comes with the winder and the deeper one.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

Larger yarn guide for Strauch's Jumbo Ball Winder. The photo shows the difference in the one that comes with the winder and the deeper one.

If in stock it ships from Maine. Back orders are drop shipped from the factory in 6-10 days.

This tool saves your knuckles from painful contact with the teeth of your drum carder while you are removing the batt from the large drum. It will not bend as does a knitting needle. Used correctly, the batt picker also saves the drum and card cloth from becoming damaged.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.

The Doffer/Cleaner brush is used to clean the large drum after you have removed the batt. It looks similar to a "Flicker" but with different points. Our Doffers are 2" wide and 4 ½" long. The pads have ½" long points spaced 72 per square inch. Use the center portion of the Doffer brush to contact the curve of the large drum. Starting at the seam, swipe the Doffer brush down the drum in the same direction as the teeth on the drum. Continue across the width of the drum. Slowly rotate the drum backwards as you use the brush to clean the entire drum.

If it shows in stock it will ship from Maine. If it is a backorder it will be drop shipped from the factory usually in 6-10 business days.

The Flip Trap gives you a convenient yet still portable place to set your tools while weaving. The Flip Trap installs into the ends of the loom sides, using the same holes as the clamps.

The pictures show it attached to a 25 inch Flip and a trestle stand, in use holding the shuttles.

In stock ships from Maine. If we should run we can backorder and drop ship from the factory. Their lead time is 2-4 weeks.

Boat Shuttles made by Shacht in sturdy Maple wood and given a light oil finished.

These are all open bottom and available in 4 sizes. 9 inch mini, 11 inch, 13 inch and 15 inch. The 9 inch and the 11 inch are slim enough to work with some Rigid Heddle applications.

SALE!!!! $10 off

9 and 11 use the 4 inch bobbins
13 uses 5 inch
15 uses 6 inch

Now you can mix and match dents in your Flip or Cricket loom with our
new Variable Dent Reed. An assortment of rigid heddle reed sections in a
variety of dents  can be inserted into our special rigid heddle frame
for different setts in the same reed. The Variable Reed is a great tool
for creating different densities in a fabric as well as using thick and
thin yarns in the warp. You’ll
     think of lots of other uses as well.

You've got your variable dent reed and now you find you want more sections.

Choose the size you want from the drop down menu.

Top Whirl Drop Spindle

Bottom Whirl Drop Spindle

Drive belt for Victoria S95/96.

Narrow Flyer.

For your Knitter's Loom
20 inch size
Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms.

Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.

For your Knitter's Loom
12 inch size
Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms.

Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.

For your Rigid Heddle Loom
16 inch size
Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms.

Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.

For your Rigid Heddle Loom
24 inch size
Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms.

Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.

For your Rigid Heddle Loom
32inch size
Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms.

Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.

Heddles for the ever popular Cricket Loom. Available in 5, 8, 10, and 12 dent.

Heddles for the Flip (folding Rigid Heddle Loom) - 15 Inch. Available in 5, 8, 10, and 12 dent.

Heddles for the Flip (folding Rigid Heddle Loom) - 20 inch. Available in 5, 8, 10, and 12 dent.

This is just the umbrella part for the Swifts and Skeinwinders. If you want a complete unit we do have listings for those as well. When they're gone, they're gone. This is the just the umbrella section. You will need a base for it to make it work.

This is the last one. Maple.

Stick shuttles made by Schacht - The simplest and most versatile of all shuttles. They are available in 9", 10", 12", 16", 20", 24" and 30" lengths. We recommend you choose a stick shuttle slightly longer than the width of your warp.

$2. off each!!! SALE

For your Knitter's Loom
12 inch size
Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms.

Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.

Heddles for the Flip (folding Rigid Heddle Loom) - 20 inch. Available in 5, 8, 10, and 12 dent.

For your8 inch Sample-it Loom - Additional reeds- CHOOSE- 5 dpi (20/10cm), 7.5 dpi (30/10cm), 10 dpi (40/10cm) and 12.5 dpi(50/10cm) available for both 30cm/12in and 50cm/20in looms. Ship from factory if not in stock in Maine. Generally a 1-2 week lead time.